Tag Archives: pipe reducer

China Custom CPVC Short Reducer Bushing of Pn10 Plastic Pipe Fittings for Supply Water with Best Sales

Product Description

PRODUCT DESCRIPTION
Chlorinated polyvinyl chloride (CPVC) is a unique polymer after polyvinyl chloride chlorination. Ordinary PVC molecular chlorine content is 45%, the chlorinated polyvinyl chloride (CPVC) molecules chlorine content is about 64% to 68%, up to more than 70%.
CPVC tensile capacity is higher than the UPVC, PP, PP-B, PP-RH, PB, HDPE, PE, PE – X RT, etc; its thermal expansion coefficient is lower than the PP, PE, PB; thermal conductivity is lower than that of PP, PE, PB and metal pipe; the temperature resistance and resistance to deformation ability is better than that of PP, UPVC, ABS and HDPE.
The series of CPVC pipes and fittings can match the standard of DIN 8079 and DIN 8080.

FEATURES OF PRODUCT
Safety and Health:
The extremely low rate of harmful bacteria breeding is superior to drinking water hygiene standard designed by both the World Health Organization and the People’s Republic of China Ministry of health. Thereby it was recommended for medical system.
Flame Retardant:
Limited oxygen index of CPVC material is 60%. The minimum igniting temperature is 482*C. No dropping fire, very low smoke rate and no poisonous gas.
Corrosion Resistant:
CPVC material has strong resistance to acid and alkali, which can be used for delivering liquid of HCL and NaOH.
Low Thermal Expansion Coefficient:
CPVC material has low coefficient of thermal expansion. Expansion loop length is 16 feet, under the condition of 100F temperature change and 20′ holding.
Anti Ultraviolet:
The ultraviolet rays will not cause breakage of polymer chains structure.
Long Service Life:
CPVC material has strong antioxidant and aging resistance performance than other material in utilization.

FIELDS OF APPLICATION

Hot and cold water applications in homes, apartments, hotels, resorts, hospitals, high and low rising buildings, corporate and commercial houses, academic institutes etc
Piping networks for pure water and medicament in pharmaceutical factory
Piping networks for beverage, dairy and drinking water supply

SERVICE
1. We are a manufacturer of plastic tubes and fittings. We accept OEM business.
2. We supply stop valve,pipe end cap,equal/reduceing tee,cold hot water ball valve,union ball valve,threaded elbow(plastic or with metal) and so on.
3. We also supply the connectors Accordingly.
4. We can offer you very competitive prices for some pipes.
5. We welcome you to visit our web and our factory. Your visiting will be highly appreciated.
6. It is my pleasure to help you.
7.If you need more customized services and offers,Please Contact Us.

MORE PRODUCT
 

OUR ADVANTAGE
1.high quality&industrial leading price
2.quick order processing & on-time delivery
3.extremely long usage life for at least 5 years
4.innovative & customer-oriented
5.rich experience in exportation
6.best quality & best service with competitive price
7.easy and fast installation, making cost minimized
8.healthy and non-toxic, free of stain,recycable, enviromentally friendly
9.Modern technical equipment in combination with proficient manual work.
10.Lightweight, convenient to transport and handle, good for labor-saving.

OUR COMPANY

FAQ
1. Are you a manufacture or trading company?
We are a well-known solution provider for plastic piping system in the world with 26 years professional experience. Welcome to visit and investigate us, you would find the difference with others.
2. Do you offer OEM service?
Yes. We have our famous brand name. But we can offer OEM service also, with same quality. We can review and accept customer design, or design based on customer requirements, by our professional R&D team.
3.Why Choose Us?
Trust in our experience.
We supply many different standards professional products for more than 60 countries and areas in the world.
Trust in our authority.
We had many professional inspections and certificates. We had passed inspections of CE,  , SGS, and get the certificates of ISO 9001, ISO 14001, OHSAS 18001, and WRAS, and so on.
Trust in our solutions.
We have professional R&D team, QA&QC team, marketing team. We have many patents and awards, can supply highest quality OEM products, and help you and do with you to settle any kind of logistical problems.
Trust in our production capacity.
We have more than 30 pipe extruding machines, and 200 injection molding machines. And those figures still increase each year.
Trust in our financial management capacity.
We obtain the “ZHangZhoug Top Export Brand” by government. We have the ability to make each your US cent efficient. Each cent, which you pay us, would be worth.
4.How to Get a Sample?
Please apply sample.
We can apply free sample for inspection, after the prices confirmed.
Sample is free.
We would supply you sample for free, and freight is collected, if you need a sample to confirm. You also can pay freight to us in advance, and let us prepaid freight, if you thought the prepaid freight is lower than collected freight.
Freight is free.
 We will undertake the freight, and pay the money into your deposit, if you give the order to us finally.

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material: CPVC
Connection: Welding
Hardness: Hard Tube
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

plastic bush

What are the environmental benefits of using plastic bushings, and how do they contribute to sustainability?

Plastic bushings offer several environmental benefits and contribute to sustainability in various ways. Here are some of the key advantages:

  • Reduced Energy Consumption: Plastic bushings generally have lower friction coefficients compared to metal bushings, which results in reduced energy consumption. The lower friction allows for smoother operation and requires less power to overcome resistance, leading to energy savings. This can be particularly significant in applications with high-speed or continuous motion, where energy efficiency is crucial.
  • Elimination of Lubrication: Many plastic bushings are self-lubricating or require minimal lubrication. Unlike metal bushings, which often require regular lubrication to maintain optimal performance, plastic bushings can operate effectively without the need for lubricants. This eliminates the need for oil or grease, reducing the consumption of lubrication products and minimizing the associated environmental impacts, such as oil spills or the disposal of used lubricants.
  • Corrosion Resistance: Plastic bushings are generally resistant to corrosion, which can be a significant advantage in various environments. Unlike metal bushings, which may corrode and require frequent replacement, plastic bushings can withstand exposure to moisture, chemicals, and other corrosive substances. This extended service life reduces the frequency of bushing replacements, leading to less material waste and lower environmental impact.
  • Weight Reduction: Plastic bushings are typically lighter than their metal counterparts, contributing to weight reduction in machinery and equipment. The use of lighter components can result in lower energy consumption during operation, especially in applications that involve frequent acceleration or deceleration. Additionally, reduced weight can lead to more efficient transportation and decreased fuel consumption during shipping.
  • Recyclability: Many plastic bushing materials are recyclable, allowing for the recovery and reuse of the materials at the end of their service life. Plastic bushings made from recyclable materials can be collected, processed, and transformed into new products, reducing the demand for virgin materials and minimizing waste generation. Proper disposal and recycling practices contribute to a circular economy and the conservation of natural resources.
  • Noise Reduction: Plastic bushings often exhibit superior damping properties compared to metal bushings, resulting in reduced noise and vibration levels. This can be advantageous in applications where noise reduction is important, such as in residential or office environments. By minimizing noise pollution, plastic bushings contribute to improved working conditions, increased comfort, and enhanced overall environmental quality.

By utilizing plastic bushings and benefiting from their environmental advantages, industries can contribute to sustainability efforts by reducing energy consumption, minimizing lubrication requirements, extending equipment lifespan, promoting recyclability, and improving overall operational efficiency. However, it is important to note that the sustainability of plastic bushings also depends on responsible manufacturing practices, proper disposal or recycling methods, and the selection of eco-friendly materials.

plastic bush

What are the common sizes and dimensions of plastic bushings, and how do I choose the right one for my application?

When selecting plastic bushings, it’s important to consider the appropriate sizes and dimensions to ensure compatibility with your application. Common sizes and dimensions of plastic bushings can vary depending on the specific industry and application requirements. Here’s some information to help you understand the common sizing aspects and guide you in choosing the right plastic bushing for your application:

  • Inner Diameter (ID): The inner diameter refers to the measurement of the opening of the bushing, which corresponds to the shaft or pin it will be mounted on. It is crucial to select a plastic bushing with an inner diameter that matches the diameter of the shaft or pin in your application. Measuring the shaft or pin accurately will help you determine the appropriate inner diameter of the bushing.
  • Outer Diameter (OD): The outer diameter refers to the measurement of the outside surface of the bushing. It corresponds to the bore or housing in which the bushing will be inserted. Ensure that the outer diameter of the plastic bushing matches the dimensions of the bore or housing to achieve a proper fit and alignment.
  • Length: The length of the plastic bushing is the distance between the two ends of the bushing. It determines the amount of space occupied by the bushing within the application. Consider the available space and clearance in your application to select a plastic bushing with an appropriate length that fits without interference.
  • Flange or Collar: Some plastic bushings may have a flange or collar at one end, which provides additional support or acts as a stopper. The presence of a flange or collar can affect the overall dimensions and installation requirements of the bushing. Determine if your application requires a bushing with a flange or collar, and consider the additional dimensions it adds to the overall size.
  • Wall Thickness: The wall thickness of the plastic bushing refers to the thickness of the material between the inner and outer surfaces of the bushing. It plays a role in determining the strength and load-bearing capacity of the bushing. Consider the expected loads and forces in your application to select a bushing with an adequate wall thickness to handle the required load requirements.

In order to choose the right plastic bushing for your application, it is recommended to follow these steps:

  1. Identify the specific dimensions and requirements of your application, such as the required inner diameter, outer diameter, length, and any additional considerations like flanges or collars.
  2. Refer to the manufacturer’s documentation, catalogs, or product datasheets to identify plastic bushings that match your required dimensions and meet the performance criteria for your application.
  3. Consider the load capacity, speed limitations, temperature range, and other relevant factors specified by the manufacturer to ensure the selected bushing meets the performance requirements of your application.
  4. If necessary, consult with application engineers or technical experts who can provide guidance based on their experience and knowledge of plastic bushings.
  5. Procure a sample or a small quantity of the selected plastic bushing to test its fit, function, and performance in your specific application before proceeding with larger-scale implementation.

By considering the common sizes and dimensions of plastic bushings and following the selection process outlined above, you can choose the right plastic bushing that fits your application’s requirements, ensuring proper functionality and performance.

plastic bush

Are there video tutorials on the proper installation and maintenance of plastic bushings in various machinery?

Yes, there are video tutorials available that provide guidance on the proper installation and maintenance of plastic bushings in various machinery. These video tutorials can be valuable resources for understanding the correct procedures and best practices to ensure optimal performance and longevity of the bushings. Here are some ways to access video tutorials on the installation and maintenance of plastic bushings:

  • Manufacturer Websites: Many manufacturers of plastic bushings provide video tutorials on their official websites. These videos are often created by the manufacturers themselves and offer detailed instructions specific to their products. Visit the websites of reputable plastic bushing manufacturers and look for their resources section or video library to find relevant installation and maintenance tutorials.
  • Online Video Platforms: Video-sharing platforms such as YouTube, Vimeo, and Dailymotion host a vast amount of instructional content, including tutorials on the installation and maintenance of various components, including plastic bushings. You can use the search function on these platforms and enter relevant keywords such as “plastic bushing installation” or “plastic bushing maintenance” to find videos created by experts or enthusiasts in the field.
  • Industrial Associations and Organizations: Industry-specific associations and organizations often provide educational resources for professionals in the field. Visit the websites of these associations or organizations related to the machinery or industrial sector you are interested in and look for any available video tutorials or instructional materials on plastic bushing installation and maintenance.
  • Online Forums and Communities: Participating in online forums and communities dedicated to machinery, engineering, or related topics can be a valuable source of information. Members of these communities often share their experiences, tips, and video tutorials on various aspects of machinery maintenance, including the installation and maintenance of plastic bushings. Engage in discussions, ask questions, and seek recommendations for video tutorials from experienced members.
  • Training Courses and Webinars: Some organizations offer online training courses or webinars on machinery maintenance and component installation, which may include specific modules on plastic bushings. These courses often provide comprehensive guidance and may include video demonstrations or tutorials as part of the learning materials. Look for training providers or educational platforms that offer courses related to machinery maintenance and inquire if they cover topics related to plastic bushing installation and maintenance.

When accessing video tutorials on the installation and maintenance of plastic bushings, it’s essential to prioritize reliable and reputable sources. Check the credentials of the video creators, read user reviews or comments, and ensure that the information provided aligns with industry best practices. Additionally, always refer to the manufacturer’s guidelines and recommendations specific to the plastic bushings you are working with, as different products may have unique installation and maintenance requirements.

By utilizing video tutorials and instructional materials, you can gain valuable insights into the proper installation and maintenance procedures for plastic bushings in various machinery, helping you ensure the correct handling and care of these components.

China Custom CPVC Short Reducer Bushing of Pn10 Plastic Pipe Fittings for Supply Water   with Best Sales China Custom CPVC Short Reducer Bushing of Pn10 Plastic Pipe Fittings for Supply Water   with Best Sales
editor by CX 2024-05-14

China Professional ASTM Sch80 CPVC PVC Plastic High Pressure Pipe Fitting Female Reducer Bushing with Best Sales

Product Description

CPVC SCH80 HIGH PRESSURE PIPING SYSTEM (ASTM F437/F439)
PRODUCT INTRODUCTION
Chlorinated polyvinyl chloride (CPVC) is a unique polymer after polyvinyl chloride chlorination. Ordinary PVC molecular chlorine content is 45%, the chlorinated polyvinyl chloride (CPVC) molecules chlorine content is about 64% to 68% up to more than 70%. CPVC tensile capacity is higher than the UPVC, PP, PP- B, PP- RH, PB, HDPE, PE, PE -X RT, etc; its thermal expansion coefficient is lower than the PP, PE, PB; thermal conductivity is lower than that of PP, PE, PB and metal pipe; the temperature resistance and resistance to deformation ability is better than that of PP UPVC, ABS and HDPE.
CPVC compounds, which be used in extruded or molded for pipes and fittings, match the standard ASTM D1784. CPVC SCH80 pipes can match the standard ASTM F441. CPVC SCH80 threaded fittings can match the standard ASTM F437. CPVC SCH80 socket fittings can match the standard ASTM F439.

FEATURES OF PRODUCT
Safety and Health:
The extremely low rate of harmful bacteria breeding is superior to drinking water hygiene standard.
Flame Retardant:
Limited oxygen index of CPVC material is 60%. The minimum ignition temperature is 482C. No dropping fire, very low smoke rate and no poisonous gas. CPVC material has strong resistance to acid and alkali, which can be used for delivering liquid of chemical.
Low Thermal Expansion Coefficient:
CPVC material has low coefficient of thermal expansion.
Pressure Rating:
The minimum burst strength of 1/2″pipe are 18 M pa, at the condition of 73 F water.
Long Service Life:
CPVC material has strong antioxidant and aging resistance performance than other material in utilization.
FIELDS OF APPLICATION
Hot and cold water applications in homes, apartments, hotels, resorts, hospitals, high and low rising buildings, corporate and commercial houses, academic institutes etc
Piping networks for pure water, drinking water and food processing plant
Piping networks for transferring liquid in chemical manufacturing plant, pulp or paper plant
Piping networks for transferring liquid in waste water treatment plant
Piping networks for transferring liquid in metal treating or electroplating plant
Piping networks for transferring liquid in semiconductor or electronic plant

 

SERVICE
1. We are a manufacturer of plastic tubes and fittings. We accept OEM business.
2. We supply stop valve,pipe end cap,equal/reduceing tee,cold hot water ball valve,union ball valve,threaded elbow(plastic or with metal) and so on.
3. We also supply the connectors Accordingly.
4. We can offer you very competitive prices for some pipes.
5. We welcome you to visit our web and our factory. Your visiting will be highly appreciated.
6. It is my pleasure to help you.
7.If you need more customized services and offers,Please Contact Us.

MORE PRODUCT

OUR ADVANTAGE
1.high quality&industrial leading price
2.quick order processing & on-time delivery
3.extremely long usage life for at least 5 years
4.innovative & customer-oriented
5.rich experience in exportation
6.best quality & best service with competitive price
7.easy and fast installation, making cost minimized
8.healthy and non-toxic, free of stain,recycable, enviromentally friendly
9.Modern technical equipment in combination with proficient manual work.
10.Lightweight, convenient to transport and handle, good for labor-saving.

OUR COMPANY

FAQ
1. Are you a manufacture or trading company?
We are a well-known solution provider for plastic piping system in the world with 26 years professional experience. Welcome to visit and investigate us, you would find the difference with others.
2. Do you offer OEM service?
Yes. We have our famous brand name. But we can offer OEM service also, with same quality. We can review and accept customer design, or design based on customer requirements, by our professional R&D team.
3.Why Choose Us?
Trust in our experience.
We supply many different standards professional products for more than 60 countries and areas in the world.
Trust in our authority.
We had many professional inspections and certificates. We had passed inspections of CE,  , SGS, and get the certificates of ISO 9001, ISO 14001, OHSAS 18001, and WRAS, and so on.
Trust in our solutions.
We have professional R&D team, QA&QC team, marketing team. We have many patents and awards, can supply highest quality OEM products, and help you and do with you to settle any kind of logistical problems.
Trust in our production capacity.
We have more than 30 pipe extruding machines, and 200 injection molding machines. And those figures still increase each year.
Trust in our financial management capacity.
We obtain the “ZHangZhoug Top Export Brand” by government. We have the ability to make each your US cent efficient. Each cent, which you pay us, would be worth.
4.How to Get a Sample?
Please apply sample.
We can apply free sample for inspection, after the prices confirmed.
Sample is free.
We would supply you sample for free, and freight is collected, if you need a sample to confirm. You also can pay freight to us in advance, and let us prepaid freight, if you thought the prepaid freight is lower than collected freight.
Freight is free.
 We will undertake the freight, and pay the money into your deposit, if you give the order to us finally.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Connection: Glue/Hot Meld
Material: Plastic
Standard: Standard
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

plastic bush

What are the environmental benefits of using plastic bushings, and how do they contribute to sustainability?

Plastic bushings offer several environmental benefits and contribute to sustainability in various ways. Here are some of the key advantages:

  • Reduced Energy Consumption: Plastic bushings generally have lower friction coefficients compared to metal bushings, which results in reduced energy consumption. The lower friction allows for smoother operation and requires less power to overcome resistance, leading to energy savings. This can be particularly significant in applications with high-speed or continuous motion, where energy efficiency is crucial.
  • Elimination of Lubrication: Many plastic bushings are self-lubricating or require minimal lubrication. Unlike metal bushings, which often require regular lubrication to maintain optimal performance, plastic bushings can operate effectively without the need for lubricants. This eliminates the need for oil or grease, reducing the consumption of lubrication products and minimizing the associated environmental impacts, such as oil spills or the disposal of used lubricants.
  • Corrosion Resistance: Plastic bushings are generally resistant to corrosion, which can be a significant advantage in various environments. Unlike metal bushings, which may corrode and require frequent replacement, plastic bushings can withstand exposure to moisture, chemicals, and other corrosive substances. This extended service life reduces the frequency of bushing replacements, leading to less material waste and lower environmental impact.
  • Weight Reduction: Plastic bushings are typically lighter than their metal counterparts, contributing to weight reduction in machinery and equipment. The use of lighter components can result in lower energy consumption during operation, especially in applications that involve frequent acceleration or deceleration. Additionally, reduced weight can lead to more efficient transportation and decreased fuel consumption during shipping.
  • Recyclability: Many plastic bushing materials are recyclable, allowing for the recovery and reuse of the materials at the end of their service life. Plastic bushings made from recyclable materials can be collected, processed, and transformed into new products, reducing the demand for virgin materials and minimizing waste generation. Proper disposal and recycling practices contribute to a circular economy and the conservation of natural resources.
  • Noise Reduction: Plastic bushings often exhibit superior damping properties compared to metal bushings, resulting in reduced noise and vibration levels. This can be advantageous in applications where noise reduction is important, such as in residential or office environments. By minimizing noise pollution, plastic bushings contribute to improved working conditions, increased comfort, and enhanced overall environmental quality.

By utilizing plastic bushings and benefiting from their environmental advantages, industries can contribute to sustainability efforts by reducing energy consumption, minimizing lubrication requirements, extending equipment lifespan, promoting recyclability, and improving overall operational efficiency. However, it is important to note that the sustainability of plastic bushings also depends on responsible manufacturing practices, proper disposal or recycling methods, and the selection of eco-friendly materials.

plastic bush

Where can I purchase plastic bushings designed for specific industry applications, such as automotive or medical equipment?

If you are looking to purchase plastic bushings designed for specific industry applications, such as automotive or medical equipment, there are several options available to you. Here are some places where you can find and purchase plastic bushings tailored for these industries:

  • Industrial Suppliers and Distributors: Industrial suppliers and distributors specializing in components for specific industries often carry plastic bushings designed for automotive or medical applications. These suppliers have a wide range of products and can provide guidance on selecting the right bushings for your specific requirements. Search for reputable industrial suppliers or distributors that cater to the automotive or medical sectors, and inquire about their available plastic bushing options.
  • Online Marketplaces and E-commerce Platforms: Online marketplaces and e-commerce platforms offer a convenient way to search for and purchase plastic bushings designed for specific industry applications. Platforms like Amazon, Alibaba, or ThomasNet have extensive catalogs of industrial components, including plastic bushings. Use relevant keywords such as “automotive plastic bushings” or “medical equipment bushings” to narrow down your search and explore the available options from different sellers.
  • Manufacturer Websites: Visit the websites of reputable manufacturers that specialize in producing plastic bushings for specific industries. Many manufacturers provide detailed product information, specifications, and application guides on their websites. Identify manufacturers known for their expertise in automotive or medical applications, and explore their product offerings. Manufacturer websites often have contact information or online inquiry forms that allow you to directly reach out for purchasing inquiries.
  • Trade Shows and Industry Events: Attend trade shows, exhibitions, or industry events related to the automotive or medical sectors. These events often feature a wide range of suppliers and manufacturers showcasing their products and innovations. It’s an excellent opportunity to connect with industry experts, explore the latest advancements in plastic bushings, and establish contacts with suppliers who specialize in serving specific industry applications.
  • Local Distributors and Retailers: Check if there are local distributors or retailers in your area that specialize in supplying components to the automotive or medical industries. These distributors often have physical stores or warehouses where you can personally visit, browse their product offerings, and make purchases. Local distributors may also provide personalized support and expertise to help you find the right plastic bushings for your application.

When purchasing plastic bushings designed for specific industry applications, it’s important to consider factors such as material compatibility, performance requirements, and industry-specific certifications or standards. Ensure that the chosen plastic bushings meet the necessary specifications and regulations for the intended application.

By exploring these purchasing options and consulting with industry experts, you can find and purchase plastic bushings that are specifically designed for automotive or medical equipment, ensuring optimal performance and compatibility with the requirements of these industries.

plastic bush

Can I get recommendations for plastic bushings suitable for high-temperature applications?

When it comes to high-temperature applications, selecting the right plastic bushings is crucial to ensure optimal performance and reliability. While many plastic materials have temperature limitations, there are specific types of plastic bushings that are designed to withstand elevated temperatures. Here are some recommendations for plastic bushings suitable for high-temperature applications:

  • PTFE (Polytetrafluoroethylene) Bushings: PTFE is a commonly used material for high-temperature applications due to its exceptional resistance to heat. PTFE bushings can operate in temperatures ranging from -200°C to +260°C (-328°F to +500°F) without significant loss of performance. They exhibit low friction, excellent chemical resistance, and maintain their dimensional stability at high temperatures.
  • PEEK (Polyether Ether Ketone) Bushings: PEEK is a high-performance thermoplastic that offers excellent mechanical properties and thermal stability. PEEK bushings can withstand temperatures up to +250°C (+482°F) continuously and have short-term temperature resistance up to +300°C (+572°F). They possess low friction, high wear resistance, and good chemical resistance, making them suitable for demanding high-temperature applications.
  • PI (Polyimide) Bushings: Polyimide, often referred to by the brand name Vespel, is a high-temperature polymer known for its excellent thermal stability and mechanical properties. PI bushings can operate in temperatures exceeding +300°C (+572°F) continuously. They offer low wear rates, high strength, and good dimensional stability, making them suitable for extreme high-temperature environments.
  • PEI (Polyetherimide) Bushings: PEI is a high-temperature engineering plastic with good mechanical properties and thermal resistance. PEI bushings can withstand temperatures up to +170°C (+338°F) continuously. They exhibit low creep, high dimensional stability, and good chemical resistance, making them suitable for applications where moderate high-temperature performance is required.
  • PPS (Polyphenylene Sulfide) Bushings: PPS is a high-performance thermoplastic that offers excellent heat resistance. PPS bushings can operate in temperatures up to +200°C (+392°F) continuously. They possess good dimensional stability, low moisture absorption, and high chemical resistance, making them suitable for high-temperature and chemically aggressive environments.

It’s important to note that the temperature ranges mentioned above are general guidelines and can vary depending on specific grades and formulations of the plastic materials. Additionally, the performance of plastic bushings in high-temperature applications can be influenced by factors such as load, speed, and the presence of external factors like chemicals or abrasive particles. Therefore, it’s advisable to consult with the manufacturer or supplier of the plastic bushings to ensure they are suitable for your specific high-temperature application.

When selecting plastic bushings for high-temperature applications, consider factors such as temperature resistance, load capacity, wear resistance, coefficient of friction, and compatibility with mating surfaces. Additionally, ensure that the installation and operating conditions are within the recommended guidelines provided by the manufacturer to maximize the performance and lifespan of the bushings.

By choosing plastic bushings specifically designed for high-temperature applications, you can ensure reliable and long-lasting performance in environments where elevated temperatures are a concern.

China Professional ASTM Sch80 CPVC PVC Plastic High Pressure Pipe Fitting Female Reducer Bushing   with Best Sales China Professional ASTM Sch80 CPVC PVC Plastic High Pressure Pipe Fitting Female Reducer Bushing   with Best Sales
editor by CX 2024-04-09

China Good quality PVC/Upvccpvc/PPR/Plastic Pipe Fitting Reducer Bushing DIN/GB Standard Pn16 bushing press

Product Description

PRODUCT DESCRIPTION

As the series of piping network products for water supply and drainage with mature technology, Pipes and fittings of PVC-U are 1 of the largest outputs for plastic products in the world, which already had been used widely both at home and abroad. For CHINAMFG PVC-U water supply piping network, the raw materials and finished products are both match or exceed the relative standards. So CHINAMFG PVC-U piping network can suit for the equipments of drinking water supply. The piping networks are designed for the uninterrupted supply of water condition from 20°C to 50°C. Under this condition, service life of piping network can up to 50 years.
TIANYAN PVC-U piping network have the full series size and model of fittings for building water supply, which can suit for many kinds of requirement.
The series of PVC-U PN16 pressure fittings can match the standard GB/T 10002 2 or DIN 8063, and the series of PVC-U PN16 pressure pipes can match the standard GB/T 10002.1 or DIN 8063.

FEATURES OF PRODUCT
High Flow Ability:
The inside and outside wall are smooth, the coefficient of friction is small, roughness is only 0.008 to 0.009, anti-fouling property is strong, fluid transport efficiency is enhanced 25% than cast iron piping network.
Corrosion Resistant:
PVC-U material has strong resistance to most of acid and alkali. No rust, no antiseptic treatment. The service life is 4 times than that of cast iron.
Light Weight and Easy Installation:
Weight is very light. The density. of PVC-U is only 1/5 to 1/6 of that of cast iron. The method of connection is very simple, and the process of installation is very quickly.
High Tensile Strength:
PVC-U has high tensile strength, and high shock strength. The piping network of PVC-U is not easy to break, and it works safety.
Long Service Life:
The piping network with normal material can be used around 20 to 30 years, but the PVC-U piping network can be used longer than 50 years.
Cheaper Prices:
The price of PVC-U piping network are cheaper than that of cast iron.

FIELDS OF APPLICATION
 

Piping networks for water supply in building.
Piping networks for piping system in water treatment plant.
Piping networks for water farming.
Piping networks for irrigation, normal water transport for industry.

SERVICE
1. We are a manufacturer of plastic tubes and fittings. We accept OEM business.
2. We supply stop valve,pipe end cap,equal/reduceing tee,cold hot water ball valve,union ball valve,threaded elbow(plastic or with metal) and so on.
3. We also supply the connectors Accordingly.
4. We can offer you very competitive prices for some pipes.
5. We welcome you to visit our web and our factory. Your visiting will be highly appreciated.
6. It is my pleasure to help you.
7.If you need more customized services and offers,Please Contact Us.

MORE PRODUCT

OUR ADVANTAGE
1.high quality&industrial leading price
2.quick order processing & on-time delivery
3.extremely long usage life for at least 5 years
4.innovative & customer-oriented
5.rich experience in exportation
6.best quality & best service with competitive price
7.easy and fast installation, making cost minimized
8.healthy and non-toxic, free of stain,recycable, enviromentally friendly
9.Modern technical equipment in combination with proficient manual work.
10.Lightweight, convenient to transport and handle, good for labor-saving.

OUR COMPANY

FAQ
1. Are you a manufacture or trading company?
We are a well-known solution provider for plastic piping system in the world with 26 years professional experience. Welcome to visit and investigate us, you would find the difference with others.
2. Do you offer OEM service?
Yes. We have our famous brand name. But we can offer OEM service also, with same quality. We can review and accept customer design, or design based on customer requirements, by our professional R&D team.
3.Why Choose Us?
Trust in our experience.
We supply many different standards professional products for more than 60 countries and areas in the world.
Trust in our authority.
We had many professional inspections and certificates. We had passed inspections of CE,  , SGS, and get the certificates of ISO 9001, ISO 14001, OHSAS 18001, and WRAS, and so on.
Trust in our solutions.
We have professional R&D team, QA&QC team, marketing team. We have many patents and awards, can supply highest quality OEM products, and help you and do with you to settle any kind of logistical problems.
Trust in our production capacity.
We have more than 30 pipe extruding machines, and 200 injection molding machines. And those figures still increase each year.
Trust in our financial management capacity.
We obtain the “ZHangZhoug Top Export Brand” by government. We have the ability to make each your US cent efficient. Each cent, which you pay us, would be worth.
4.How to Get a Sample?
Please apply sample.
We can apply free sample for inspection, after the prices confirmed.
Sample is free.
We would supply you sample for free, and freight is collected, if you need a sample to confirm. You also can pay freight to us in advance, and let us prepaid freight, if you thought the prepaid freight is lower than collected freight.
Freight is free.
 We will undertake the freight, and pay the money into your deposit, if you give the order to us finally.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material: PVC
Connection: Glue
Color: Dark Grey
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

plastic bush

Can I get recommendations for plastic bushings suitable for use in food processing or pharmaceutical machinery?

Yes, recommendations for plastic bushings suitable for use in food processing or pharmaceutical machinery can be obtained. When selecting plastic bushings for such applications, it is crucial to consider factors such as material compatibility, regulatory compliance, hygiene requirements, and resistance to chemicals and cleaning agents. Here are some options to help you find suitable plastic bushings:

  • Manufacturer Recommendations: Start by consulting manufacturers that specialize in producing plastic bushings for food processing or pharmaceutical applications. These manufacturers are knowledgeable about the specific requirements of these industries and can recommend bushing materials that comply with relevant regulations and standards. Contact their technical support teams or refer to their product documentation to obtain specific recommendations based on your application’s needs.
  • Industry Associations and Standards: Industry associations and regulatory bodies in the food processing and pharmaceutical sectors often provide guidelines and standards for equipment components, including bushings. Examples include organizations like the Food and Drug Administration (FDA) for food processing or the International Society for Pharmaceutical Engineering (ISPE) for pharmaceutical machinery. Refer to their guidelines or consult with industry experts to identify recommended materials and specifications for plastic bushings.
  • Specialty Suppliers: Look for specialty suppliers that focus on providing components for food processing or pharmaceutical machinery. These suppliers often have a range of plastic bushings specifically designed and certified for use in these industries. They can offer guidance on selecting bushings that meet the required standards and provide the necessary performance characteristics for your application. Search for suppliers that have experience serving the food processing and pharmaceutical sectors.
  • Material Certifications: Certain certifications and approvals can indicate the suitability of plastic bushings for use in food processing or pharmaceutical machinery. Check if the bushing materials comply with regulations such as FDA 21 CFR, EU Regulation (EC) No. 1935/2004, or NSF/ANSI Standard 51. Material datasheets or manufacturer documentation should provide information about the certifications and approvals obtained for the bushing materials.
  • Consulting with Experts: If you require more specialized or specific recommendations, consider consulting with experts in the field of food processing or pharmaceutical engineering. These experts can provide insights based on their experience and knowledge of industry-specific requirements. Engage with consultants, engineers, or professionals who have expertise in the selection of components for food processing or pharmaceutical machinery.

When evaluating plastic bushings for food processing or pharmaceutical machinery, it is essential to consider the specific operating conditions, such as temperature, moisture, and cleaning processes, as well as the mechanical loads and movements involved. Additionally, ensure that the selected bushings are compatible with the mating surfaces and other components in the machinery.

By utilizing these resources and considering the factors mentioned above, you can obtain recommendations for plastic bushings suitable for use in food processing or pharmaceutical machinery, ensuring compliance with industry standards and maintaining the integrity of your processes.

plastic bush

Can I find reviews comparing the durability and performance of different types of plastic bushings?

Yes, it is possible to find reviews comparing the durability and performance of different types of plastic bushings. Reviews can be valuable resources for gaining insights into the real-world experiences of users and professionals who have tested and evaluated various plastic bushings. Here are some ways to find reviews comparing the durability and performance of different types of plastic bushings:

  • Online Retailers and E-commerce Platforms: Online retailers and e-commerce platforms that sell plastic bushings often have customer review sections where users can share their experiences and opinions. Browse through the product listings of plastic bushings and look for reviews or ratings provided by customers. While individual reviews may not directly compare different types of bushings, they can still offer valuable insights into the durability and performance of specific products.
  • Industrial Forums and Discussion Boards: Participating in online forums and discussion boards dedicated to industrial machinery, engineering, or related topics can provide access to valuable user experiences and comparisons. Engage in discussions, ask questions, and inquire about the experiences of professionals who have tested different types of plastic bushings. These platforms often have knowledgeable members who can share their insights and provide comparisons based on their firsthand experiences.
  • Industry Publications and Magazines: Industry-specific publications and magazines may feature articles, case studies, or product reviews that compare the durability and performance of different types of plastic bushings. Check online or physical copies of these publications related to the machinery, engineering, or industrial sectors for any available reviews or comparisons. These sources often provide in-depth analysis and expert opinions on the performance of various plastic bushings.
  • Manufacturer and Supplier Websites: Manufacturers and suppliers of plastic bushings sometimes publish technical articles, white papers, or case studies that highlight the performance characteristics and durability of their products. Visit the websites of reputable manufacturers or suppliers and explore their resources sections or technical documentation. While these sources may focus more on promoting specific products, they can still provide valuable information and insights into the performance of different types of plastic bushings.
  • Research Papers and Technical Journals: Academic research papers and technical journals in the field of materials science, engineering, or tribology may contain studies or comparative analyses of different plastic bushing materials. Access online databases of research papers or visit university libraries to search for relevant publications. These sources often provide scientific data, test results, and detailed evaluations of the durability and performance of various plastic bushings.

When reviewing and comparing different types of plastic bushings, it’s important to consider multiple sources and perspectives. Keep in mind that the performance of plastic bushings can be influenced by various factors, including application-specific conditions, load requirements, temperature ranges, and chemical exposures. Assessing reviews and comparisons in the context of your specific application and requirements can help you make informed decisions.

By utilizing reviews and comparisons, you can gain valuable insights into the durability and performance of different types of plastic bushings, helping you select the most suitable option for your specific needs.

plastic bush

Are there different types of plastic materials used in manufacturing plastic bushings, and how do they affect performance?

Yes, there are different types of plastic materials used in manufacturing plastic bushings, and the choice of material can significantly affect their performance. Here are some common types of plastic materials used in plastic bushings and how they can impact performance:

  • Nylon: Nylon is a widely used material for plastic bushings. It offers good wear resistance, low friction, and excellent load-carrying capacity. Nylon bushings are self-lubricating, reducing the need for additional lubrication. They are suitable for a wide range of applications and can operate in both dry and lubricated conditions.
  • PTFE (Polytetrafluoroethylene): PTFE, commonly known by the brand name Teflon, is a high-performance plastic material with exceptional low-friction properties. PTFE bushings have excellent chemical resistance, operate well in high-temperature environments, and exhibit low wear rates. They are often used in demanding applications where high precision and low friction are critical.
  • UHMW (Ultra-High-Molecular-Weight Polyethylene): UHMW is a durable and tough plastic material known for its high impact strength and abrasion resistance. UHMW bushings offer low friction, good chemical resistance, and excellent wear properties. They are commonly used in applications involving heavy loads, impact, or abrasive conditions.
  • POM (Polyoxymethylene): POM, also known as acetal or Delrin, is a high-strength engineering plastic with good dimensional stability and low friction. POM bushings exhibit low moisture absorption, excellent wear resistance, and a low coefficient of friction against metal surfaces. They are suitable for applications requiring high precision, low wear, and resistance to moisture or chemicals.
  • Composite Polymers: Composite polymers are materials that combine different plastic resins or incorporate reinforcing fibers or fillers. These composite materials can offer enhanced mechanical properties such as increased strength, improved wear resistance, or reduced friction. Composite polymer bushings are tailored for specific applications, and the choice of composite formulation depends on the desired performance characteristics.

The choice of plastic material for a specific application depends on various factors, including the operating conditions, load requirements, temperature range, speed, and environmental factors. Each plastic material has its own unique properties and advantages, which make them suitable for specific applications. For example, nylon bushings may be preferred for their balanced performance and versatility, while PTFE bushings excel in applications requiring low friction and high temperature resistance.

When selecting a plastic material for bushings, it’s important to consider factors such as load capacity, wear resistance, coefficient of friction, chemical resistance, temperature range, and compatibility with mating surfaces. Manufacturers and suppliers of plastic bushings can provide guidance on selecting the appropriate material based on your specific application requirements.

It’s worth noting that the performance of plastic bushings can be influenced by factors such as design considerations, surface finish, mating materials, and operating conditions. Proper installation, regular maintenance, and adherence to manufacturer guidelines are crucial for achieving optimal performance and longevity of plastic bushings in industrial applications.

By understanding the different types of plastic materials available and their impact on performance, you can make informed decisions when selecting plastic bushings for your specific application needs.

China Good quality PVC/Upvccpvc/PPR/Plastic Pipe Fitting Reducer Bushing DIN/GB Standard Pn16   bushing press		China Good quality PVC/Upvccpvc/PPR/Plastic Pipe Fitting Reducer Bushing DIN/GB Standard Pn16   bushing press
editor by CX 2024-03-29