Tag Archives: water reducer

China Custom CPVC Short Reducer Bushing of Pn10 Plastic Pipe Fittings for Supply Water with Best Sales

Product Description

PRODUCT DESCRIPTION
Chlorinated polyvinyl chloride (CPVC) is a unique polymer after polyvinyl chloride chlorination. Ordinary PVC molecular chlorine content is 45%, the chlorinated polyvinyl chloride (CPVC) molecules chlorine content is about 64% to 68%, up to more than 70%.
CPVC tensile capacity is higher than the UPVC, PP, PP-B, PP-RH, PB, HDPE, PE, PE – X RT, etc; its thermal expansion coefficient is lower than the PP, PE, PB; thermal conductivity is lower than that of PP, PE, PB and metal pipe; the temperature resistance and resistance to deformation ability is better than that of PP, UPVC, ABS and HDPE.
The series of CPVC pipes and fittings can match the standard of DIN 8079 and DIN 8080.

FEATURES OF PRODUCT
Safety and Health:
The extremely low rate of harmful bacteria breeding is superior to drinking water hygiene standard designed by both the World Health Organization and the People’s Republic of China Ministry of health. Thereby it was recommended for medical system.
Flame Retardant:
Limited oxygen index of CPVC material is 60%. The minimum igniting temperature is 482*C. No dropping fire, very low smoke rate and no poisonous gas.
Corrosion Resistant:
CPVC material has strong resistance to acid and alkali, which can be used for delivering liquid of HCL and NaOH.
Low Thermal Expansion Coefficient:
CPVC material has low coefficient of thermal expansion. Expansion loop length is 16 feet, under the condition of 100F temperature change and 20′ holding.
Anti Ultraviolet:
The ultraviolet rays will not cause breakage of polymer chains structure.
Long Service Life:
CPVC material has strong antioxidant and aging resistance performance than other material in utilization.

FIELDS OF APPLICATION

Hot and cold water applications in homes, apartments, hotels, resorts, hospitals, high and low rising buildings, corporate and commercial houses, academic institutes etc
Piping networks for pure water and medicament in pharmaceutical factory
Piping networks for beverage, dairy and drinking water supply

SERVICE
1. We are a manufacturer of plastic tubes and fittings. We accept OEM business.
2. We supply stop valve,pipe end cap,equal/reduceing tee,cold hot water ball valve,union ball valve,threaded elbow(plastic or with metal) and so on.
3. We also supply the connectors Accordingly.
4. We can offer you very competitive prices for some pipes.
5. We welcome you to visit our web and our factory. Your visiting will be highly appreciated.
6. It is my pleasure to help you.
7.If you need more customized services and offers,Please Contact Us.

MORE PRODUCT
 

OUR ADVANTAGE
1.high quality&industrial leading price
2.quick order processing & on-time delivery
3.extremely long usage life for at least 5 years
4.innovative & customer-oriented
5.rich experience in exportation
6.best quality & best service with competitive price
7.easy and fast installation, making cost minimized
8.healthy and non-toxic, free of stain,recycable, enviromentally friendly
9.Modern technical equipment in combination with proficient manual work.
10.Lightweight, convenient to transport and handle, good for labor-saving.

OUR COMPANY

FAQ
1. Are you a manufacture or trading company?
We are a well-known solution provider for plastic piping system in the world with 26 years professional experience. Welcome to visit and investigate us, you would find the difference with others.
2. Do you offer OEM service?
Yes. We have our famous brand name. But we can offer OEM service also, with same quality. We can review and accept customer design, or design based on customer requirements, by our professional R&D team.
3.Why Choose Us?
Trust in our experience.
We supply many different standards professional products for more than 60 countries and areas in the world.
Trust in our authority.
We had many professional inspections and certificates. We had passed inspections of CE,  , SGS, and get the certificates of ISO 9001, ISO 14001, OHSAS 18001, and WRAS, and so on.
Trust in our solutions.
We have professional R&D team, QA&QC team, marketing team. We have many patents and awards, can supply highest quality OEM products, and help you and do with you to settle any kind of logistical problems.
Trust in our production capacity.
We have more than 30 pipe extruding machines, and 200 injection molding machines. And those figures still increase each year.
Trust in our financial management capacity.
We obtain the “ZHangZhoug Top Export Brand” by government. We have the ability to make each your US cent efficient. Each cent, which you pay us, would be worth.
4.How to Get a Sample?
Please apply sample.
We can apply free sample for inspection, after the prices confirmed.
Sample is free.
We would supply you sample for free, and freight is collected, if you need a sample to confirm. You also can pay freight to us in advance, and let us prepaid freight, if you thought the prepaid freight is lower than collected freight.
Freight is free.
 We will undertake the freight, and pay the money into your deposit, if you give the order to us finally.

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material: CPVC
Connection: Welding
Hardness: Hard Tube
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

plastic bush

What are the environmental benefits of using plastic bushings, and how do they contribute to sustainability?

Plastic bushings offer several environmental benefits and contribute to sustainability in various ways. Here are some of the key advantages:

  • Reduced Energy Consumption: Plastic bushings generally have lower friction coefficients compared to metal bushings, which results in reduced energy consumption. The lower friction allows for smoother operation and requires less power to overcome resistance, leading to energy savings. This can be particularly significant in applications with high-speed or continuous motion, where energy efficiency is crucial.
  • Elimination of Lubrication: Many plastic bushings are self-lubricating or require minimal lubrication. Unlike metal bushings, which often require regular lubrication to maintain optimal performance, plastic bushings can operate effectively without the need for lubricants. This eliminates the need for oil or grease, reducing the consumption of lubrication products and minimizing the associated environmental impacts, such as oil spills or the disposal of used lubricants.
  • Corrosion Resistance: Plastic bushings are generally resistant to corrosion, which can be a significant advantage in various environments. Unlike metal bushings, which may corrode and require frequent replacement, plastic bushings can withstand exposure to moisture, chemicals, and other corrosive substances. This extended service life reduces the frequency of bushing replacements, leading to less material waste and lower environmental impact.
  • Weight Reduction: Plastic bushings are typically lighter than their metal counterparts, contributing to weight reduction in machinery and equipment. The use of lighter components can result in lower energy consumption during operation, especially in applications that involve frequent acceleration or deceleration. Additionally, reduced weight can lead to more efficient transportation and decreased fuel consumption during shipping.
  • Recyclability: Many plastic bushing materials are recyclable, allowing for the recovery and reuse of the materials at the end of their service life. Plastic bushings made from recyclable materials can be collected, processed, and transformed into new products, reducing the demand for virgin materials and minimizing waste generation. Proper disposal and recycling practices contribute to a circular economy and the conservation of natural resources.
  • Noise Reduction: Plastic bushings often exhibit superior damping properties compared to metal bushings, resulting in reduced noise and vibration levels. This can be advantageous in applications where noise reduction is important, such as in residential or office environments. By minimizing noise pollution, plastic bushings contribute to improved working conditions, increased comfort, and enhanced overall environmental quality.

By utilizing plastic bushings and benefiting from their environmental advantages, industries can contribute to sustainability efforts by reducing energy consumption, minimizing lubrication requirements, extending equipment lifespan, promoting recyclability, and improving overall operational efficiency. However, it is important to note that the sustainability of plastic bushings also depends on responsible manufacturing practices, proper disposal or recycling methods, and the selection of eco-friendly materials.

plastic bush

What are the common sizes and dimensions of plastic bushings, and how do I choose the right one for my application?

When selecting plastic bushings, it’s important to consider the appropriate sizes and dimensions to ensure compatibility with your application. Common sizes and dimensions of plastic bushings can vary depending on the specific industry and application requirements. Here’s some information to help you understand the common sizing aspects and guide you in choosing the right plastic bushing for your application:

  • Inner Diameter (ID): The inner diameter refers to the measurement of the opening of the bushing, which corresponds to the shaft or pin it will be mounted on. It is crucial to select a plastic bushing with an inner diameter that matches the diameter of the shaft or pin in your application. Measuring the shaft or pin accurately will help you determine the appropriate inner diameter of the bushing.
  • Outer Diameter (OD): The outer diameter refers to the measurement of the outside surface of the bushing. It corresponds to the bore or housing in which the bushing will be inserted. Ensure that the outer diameter of the plastic bushing matches the dimensions of the bore or housing to achieve a proper fit and alignment.
  • Length: The length of the plastic bushing is the distance between the two ends of the bushing. It determines the amount of space occupied by the bushing within the application. Consider the available space and clearance in your application to select a plastic bushing with an appropriate length that fits without interference.
  • Flange or Collar: Some plastic bushings may have a flange or collar at one end, which provides additional support or acts as a stopper. The presence of a flange or collar can affect the overall dimensions and installation requirements of the bushing. Determine if your application requires a bushing with a flange or collar, and consider the additional dimensions it adds to the overall size.
  • Wall Thickness: The wall thickness of the plastic bushing refers to the thickness of the material between the inner and outer surfaces of the bushing. It plays a role in determining the strength and load-bearing capacity of the bushing. Consider the expected loads and forces in your application to select a bushing with an adequate wall thickness to handle the required load requirements.

In order to choose the right plastic bushing for your application, it is recommended to follow these steps:

  1. Identify the specific dimensions and requirements of your application, such as the required inner diameter, outer diameter, length, and any additional considerations like flanges or collars.
  2. Refer to the manufacturer’s documentation, catalogs, or product datasheets to identify plastic bushings that match your required dimensions and meet the performance criteria for your application.
  3. Consider the load capacity, speed limitations, temperature range, and other relevant factors specified by the manufacturer to ensure the selected bushing meets the performance requirements of your application.
  4. If necessary, consult with application engineers or technical experts who can provide guidance based on their experience and knowledge of plastic bushings.
  5. Procure a sample or a small quantity of the selected plastic bushing to test its fit, function, and performance in your specific application before proceeding with larger-scale implementation.

By considering the common sizes and dimensions of plastic bushings and following the selection process outlined above, you can choose the right plastic bushing that fits your application’s requirements, ensuring proper functionality and performance.

plastic bush

Are there video tutorials on the proper installation and maintenance of plastic bushings in various machinery?

Yes, there are video tutorials available that provide guidance on the proper installation and maintenance of plastic bushings in various machinery. These video tutorials can be valuable resources for understanding the correct procedures and best practices to ensure optimal performance and longevity of the bushings. Here are some ways to access video tutorials on the installation and maintenance of plastic bushings:

  • Manufacturer Websites: Many manufacturers of plastic bushings provide video tutorials on their official websites. These videos are often created by the manufacturers themselves and offer detailed instructions specific to their products. Visit the websites of reputable plastic bushing manufacturers and look for their resources section or video library to find relevant installation and maintenance tutorials.
  • Online Video Platforms: Video-sharing platforms such as YouTube, Vimeo, and Dailymotion host a vast amount of instructional content, including tutorials on the installation and maintenance of various components, including plastic bushings. You can use the search function on these platforms and enter relevant keywords such as “plastic bushing installation” or “plastic bushing maintenance” to find videos created by experts or enthusiasts in the field.
  • Industrial Associations and Organizations: Industry-specific associations and organizations often provide educational resources for professionals in the field. Visit the websites of these associations or organizations related to the machinery or industrial sector you are interested in and look for any available video tutorials or instructional materials on plastic bushing installation and maintenance.
  • Online Forums and Communities: Participating in online forums and communities dedicated to machinery, engineering, or related topics can be a valuable source of information. Members of these communities often share their experiences, tips, and video tutorials on various aspects of machinery maintenance, including the installation and maintenance of plastic bushings. Engage in discussions, ask questions, and seek recommendations for video tutorials from experienced members.
  • Training Courses and Webinars: Some organizations offer online training courses or webinars on machinery maintenance and component installation, which may include specific modules on plastic bushings. These courses often provide comprehensive guidance and may include video demonstrations or tutorials as part of the learning materials. Look for training providers or educational platforms that offer courses related to machinery maintenance and inquire if they cover topics related to plastic bushing installation and maintenance.

When accessing video tutorials on the installation and maintenance of plastic bushings, it’s essential to prioritize reliable and reputable sources. Check the credentials of the video creators, read user reviews or comments, and ensure that the information provided aligns with industry best practices. Additionally, always refer to the manufacturer’s guidelines and recommendations specific to the plastic bushings you are working with, as different products may have unique installation and maintenance requirements.

By utilizing video tutorials and instructional materials, you can gain valuable insights into the proper installation and maintenance procedures for plastic bushings in various machinery, helping you ensure the correct handling and care of these components.

China Custom CPVC Short Reducer Bushing of Pn10 Plastic Pipe Fittings for Supply Water   with Best Sales China Custom CPVC Short Reducer Bushing of Pn10 Plastic Pipe Fittings for Supply Water   with Best Sales
editor by CX 2024-05-14

China wholesaler PVC Plastic Reducer Bushing for Water Supply bushing arm

Product Description

Advantage:
1. Environmentally friendly materials
2. Durable, anti-cracking and compressive
3. PVC adhesive, dense and water-proof

Application scenarios:
1. Hydroponic cultivation of green plants: Use large pipe fittings to combine soilless cultivation, clean and sanitary, and not restricted by space and region
2. Farmland irrigation: can be assembled into farmland irrigation equipment, convenient and affordable
3. Field railing: It is convenient and practical to use pipe fittings to combine railings.
 

Type PVC Bushing
Color Dark gray
ID size 25*20
32*20/32*25
40*32
50*40
63*40/63*50
Unit mm

Company Profile
HangZhou HI-TECH SMART MACHINERY CO LTD was established in 2013, is a high tech company specialized in pneumatic components and microduct accessories manufacturing. After years’ hard working, it has owned 2 factories now, and the products include pneumatic vibrators, air cylinders, solenoid valves, air treatment units, pneumatic fittings&mufflers, microduct connectors and other accessories. We have sold our goods to more than 60 countries, and that number is still increasing.

Our Services & Strength:
1. We have more than 10 years experience on pneumatic products; 
2. Excellent quality control has always been the goal of our practice; 
3. You can purchase most of the pneumatic products here; 
4. Sample orders and orders with a small number of products are acceptable; 
5. OEM, ODM is ok for us. Not only the label and packaging, but also the personalized customization of the product itself; 
6. Any requirements, just feel free to let us know.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: One Year
Warranty: One Year
Material: PVC
Connection: Male
Materials: PVC
Color: Dark Gray
Customization:
Available

|

Customized Request

plastic bush

Can I find information on alternatives to plastic bushings for specific industrial applications?

If you are looking for information on alternatives to plastic bushings for specific industrial applications, there are several ways to find relevant information. Here’s a detailed explanation:

1. Research Online:

– Conduct a search on industrial websites, forums, and technical resources that focus on machinery, equipment, and industrial applications. Look for articles, whitepapers, or case studies that discuss alternative bushing materials or technologies.

– Explore manufacturer websites and product catalogs. Many manufacturers provide detailed information about their bushing products, including alternative materials they offer for specific applications.

– Check industry-specific publications or journals that cover topics related to machinery, equipment, or specific industrial sectors. These publications often feature articles or research papers discussing alternative bushing options and their suitability for various applications.

2. Consult with Industry Experts:

– Seek advice from industry professionals, engineers, or consultants who specialize in the specific industrial application you are interested in. They can provide insights based on their expertise and experience with alternative bushing materials.

– Attend industry conferences, trade shows, or seminars where you can network with experts and professionals in your field. Engage in discussions and ask questions about alternative bushing solutions for your specific application.

3. Contact Bushing Manufacturers:

– Reach out to manufacturers or suppliers of bushing products and inquire about alternative materials they offer. Many manufacturers have technical support teams who can provide guidance and recommendations based on your specific requirements.

– Share details about your application, such as operating conditions, load requirements, temperature range, and any specific performance criteria. This information will help manufacturers suggest suitable alternatives to plastic bushings.

4. Consider Other Bearing Types:

– In some cases, alternative bearing types may be suitable replacements for plastic bushings. Explore options like roller bearings, needle bearings, or sleeve bearings, depending on the specific application requirements.

– Each bearing type has its own advantages and limitations, so it’s important to consider factors such as load capacity, speed, lubrication requirements, and environmental conditions when evaluating alternative bearing options.

5. Evaluate Application-Specific Requirements:

– Consider the specific requirements of your industrial application when exploring alternatives to plastic bushings. Factors such as temperature range, chemical compatibility, load capacity, noise reduction, or self-lubrication can influence the suitability of different materials or bearing solutions.

– Take into account the overall performance, durability, and maintenance requirements of the alternative bushing options. Assess how they align with your application’s needs and any potential trade-offs involved.

By conducting online research, consulting with industry experts, contacting manufacturers, considering alternative bearing types, and evaluating application-specific requirements, you can gather valuable information on alternatives to plastic bushings for specific industrial applications. This will help you make informed decisions and select the most suitable bushing solutions for your specific needs.

plastic bush

Can I find information on the compatibility of plastic bushings with different shaft materials?

Yes, you can find information on the compatibility of plastic bushings with different shaft materials. It is important to consider the compatibility between the bushing material and the shaft material to ensure proper functioning, minimize wear, and prevent damage. Here are some sources where you can find information on the compatibility of plastic bushings with different shaft materials:

  • Manufacturer Documentation: Manufacturers of plastic bushings often provide information about the compatibility of their bushings with various shaft materials. This information may be available in their technical documentation, catalogs, or product datasheets. Look for details on recommended shaft materials, material pairings to avoid, and any specific considerations or limitations regarding compatibility.
  • Engineering Handbooks and Reference Guides: Engineering handbooks and reference guides related to tribology, materials science, or mechanical design can offer valuable insights into the compatibility of plastic bushings with different shaft materials. These resources may provide compatibility charts, tables, or guidelines based on material properties, surface finishes, lubrication requirements, and other relevant factors. Consult reputable handbooks or reference guides that cover the specific materials involved in your application.
  • Online Databases and Technical Resources: There are online databases and technical resources dedicated to providing material compatibility information. These resources often include information on the compatibility of various materials, including plastic bushings and shaft materials. Examples include the MatWeb material database or material compatibility databases provided by material science organizations. Search for reliable online resources that have information on the compatibility of plastic bushings with different shaft materials.
  • Consulting with Material Experts: If you require more specialized or specific information regarding the compatibility of plastic bushings with particular shaft materials, consider consulting with material experts or engineers who have expertise in the field of tribology or material science. These experts can provide guidance based on their knowledge and experience and help you determine the compatibility considerations for your specific application.
  • Application Experience and Case Studies: Sometimes, information on the compatibility of plastic bushings with different shaft materials can be found through application experience and case studies. Industry forums, technical publications, or case study reports may provide insights into successful material pairings and real-world examples of compatibility. Engage with industry professionals, participate in relevant forums or communities, and explore technical literature to learn from others’ experiences and gain valuable information on material compatibility.

When assessing the compatibility between plastic bushings and shaft materials, factors such as material hardness, surface finish, lubrication, operating conditions, and expected loads should be taken into account. It is important to choose a plastic bushing material that is compatible with the specific shaft material to ensure proper functioning, minimize wear, and achieve the desired performance and lifespan of the bushing.

By utilizing the available resources and expertise, you can find information on the compatibility of plastic bushings with different shaft materials, enabling you to make informed decisions and select the appropriate bushing and shaft combination for your application.

plastic bush

Where can I find reliable suppliers for high-quality plastic bushings for industrial applications?

If you’re looking for reliable suppliers of high-quality plastic bushings for industrial applications, there are several avenues you can explore. Here are some sources where you can find reputable suppliers:

  • Online Industrial Directories: Online industrial directories such as Thomasnet, GlobalSpec, or Kompass provide comprehensive listings of suppliers, manufacturers, and distributors of various industrial products, including plastic bushings. These directories often allow you to filter search results based on location, industry, certifications, and other criteria, helping you find reliable suppliers that meet your specific requirements.
  • Trade Shows and Exhibitions: Attending trade shows or exhibitions related to industrial machinery, engineering, or maintenance can be an excellent way to connect with reputable suppliers. These events often feature booths or exhibits by manufacturers and suppliers of plastic bushings. You can engage in direct conversations, see product samples, and gather information about the supplier’s capabilities and product quality.
  • Industry Associations and Networks: Industry associations or networks related to your specific industrial application or sector can provide valuable resources and connections to reliable suppliers. These associations often have membership directories or supplier databases that can help you identify reputable suppliers of plastic bushings. Additionally, reaching out to fellow industry professionals through these networks can provide recommendations and insights on reliable suppliers they have worked with.
  • Manufacturer Websites: Many manufacturers of plastic bushings have their own websites where they showcase their products and provide information about their company and capabilities. Visiting these websites allows you to learn more about the manufacturer’s quality standards, certifications, production processes, and product range. Manufacturer websites often have contact information or inquiry forms that you can use to get in touch with them directly.
  • Referrals and Recommendations: Seek referrals or recommendations from colleagues, industry professionals, or machinery manufacturers who have experience in using plastic bushings. Personal recommendations can provide valuable insights into the reliability, quality, and customer service of specific suppliers. People who have had positive experiences with suppliers in the past can point you in the right direction.
  • Online Marketplaces: Online marketplaces such as Alibaba, Amazon Business, or Global Sources often feature a wide range of suppliers offering plastic bushings. These platforms provide user reviews, ratings, and detailed supplier profiles, helping you assess the reliability and quality of potential suppliers. However, exercise caution and perform due diligence when dealing with suppliers on online marketplaces to ensure their credibility and product quality.

When evaluating suppliers, consider factors such as their industry experience, reputation, product quality, certifications, delivery capabilities, and customer service. Request samples or product specifications to assess the quality of the plastic bushings they offer. It’s also beneficial to establish clear communication channels with the supplier to address any questions or concerns you may have.

By exploring these sources and conducting thorough research, you can find reliable suppliers of high-quality plastic bushings for your industrial applications, ensuring that you receive products that meet your requirements and perform optimally in your machinery.

China wholesaler PVC Plastic Reducer Bushing for Water Supply   bushing arm	China wholesaler PVC Plastic Reducer Bushing for Water Supply   bushing arm
editor by CX 2024-04-02

China factory Reducer Bushing ASTM PVC-U Plastic Drainage Fittings for Water Plumbing Price List with high quality

Product Description

1.Raw material:PVC
2 Size:1-1/4″-6″
3 Standard:ASTM D2665
5 Usage: Water DRAINAGE

Specifications
1.Material:PVC
2.Standard:ASTM D2665
3.Certification:ISO9001 and CE
4.Temperature:100 Centigrade
We can offer different kinds of the product.
We have other models.Such as elbow, tee, male adapter, reducing ring ect.
For more information, pls visit our website.If you have interest, pls feel free to contact

Advantages:
1) Healthy, bacteriological neutral, conforming to drinking water standards
2) Resistant to high temperatures, good impact strength
3) Convenient and reliable installation, low construction expenses
4) Excellent heat-insulation property from minimum thermal conductivity
5) Lightweight, convenient to transport and handle, good for labor-saving
6) Smooth inner walls reduce pressure loss and increase flow speed
7) Sound insulation (reduced by 40% compared to galvanized steel pipes)
8)Temperature:100 Centigrade

1.Company:ZHangZhoug Xihu (West Lake) Dis. CHINAMFG Plastic Co., Ltd
2.Address:HangZhou Industrial Zone, Xihu (West Lake) Dis. District, HangZhou City, ZHangZhoug, China
3.Web side:tianyan-holding

Description Size (inch/mm) Weight  (g/pc) PCS/CTN Packing size (m)
 DWV PIPE              1-1/4″×2.0 0.38 10 4 0.0423 0.0423
1-1/2″×2.2 0.47 6 4 0. 0571 0. 0571
2″×2.3 0.75 4 4 0.0604 0.0604
3″×3.2 1.38 2 4 0.0889 0.0889

FAQ:
1.What is your MOQ?
Our MOQ is usually 5 CTNS.

2.What is your delievery time?
The time of delievery is around 30-45days.

3.What is the shipping port?
We ship the goods via HangZhou or ZheJiang port.

4.What is your payment terms?
We accept 30% T/T in advance,70% in the period of shipment or 100% L/C.

5.How should I contact you?
You can contact us with Trade Manager or send us an email by click Contact Supplier bottom.

6.What is the location of your company?
Our company is located in the HangZhou ZHangZhoug Province,China.
If you would like to have a visit, you are much welcome.

7.How about the samples?
We could send you the samples ,most samples are free to send to most places in China.If sent to other countries,transport fee shoule be paid by you.

8.Why choose us?
1 Genuine produces with excellent quality and competitive price.
2 Cooperating with the customers all over the world and knowing the markets very well.
3 CHINAMFG is a listed company.Everything can be rest assured working with us.
4 After- Services will be highly-satisfied.Any problems and feedbacks will be answered in a short of time.

Our Services:
1.Any inquiries will be replied within 24 hours
2.Professional manufacturer.
3.OEM is available.
4.High quality, standard designs,reasonable&competitive price,fast lead time.
5.Faster delivery:Sample will be prepared in 2-3days.
6.Shipping:We have strong cooperation with DHL,TNT,UPS,MSK,China Shipping,etc.
7.You can also choose your own shipping forwarder.

       
         
         

 

Material: Plastic
Connection: Glue/Hot Meld
Transport Package: Cartons
Specification: 1-1/4"-6"
Trademark: TY/OEM
Origin: China
Customization:
Available

|

Customized Request

plastic bush

Can I find information on alternatives to plastic bushings for specific industrial applications?

If you are looking for information on alternatives to plastic bushings for specific industrial applications, there are several ways to find relevant information. Here’s a detailed explanation:

1. Research Online:

– Conduct a search on industrial websites, forums, and technical resources that focus on machinery, equipment, and industrial applications. Look for articles, whitepapers, or case studies that discuss alternative bushing materials or technologies.

– Explore manufacturer websites and product catalogs. Many manufacturers provide detailed information about their bushing products, including alternative materials they offer for specific applications.

– Check industry-specific publications or journals that cover topics related to machinery, equipment, or specific industrial sectors. These publications often feature articles or research papers discussing alternative bushing options and their suitability for various applications.

2. Consult with Industry Experts:

– Seek advice from industry professionals, engineers, or consultants who specialize in the specific industrial application you are interested in. They can provide insights based on their expertise and experience with alternative bushing materials.

– Attend industry conferences, trade shows, or seminars where you can network with experts and professionals in your field. Engage in discussions and ask questions about alternative bushing solutions for your specific application.

3. Contact Bushing Manufacturers:

– Reach out to manufacturers or suppliers of bushing products and inquire about alternative materials they offer. Many manufacturers have technical support teams who can provide guidance and recommendations based on your specific requirements.

– Share details about your application, such as operating conditions, load requirements, temperature range, and any specific performance criteria. This information will help manufacturers suggest suitable alternatives to plastic bushings.

4. Consider Other Bearing Types:

– In some cases, alternative bearing types may be suitable replacements for plastic bushings. Explore options like roller bearings, needle bearings, or sleeve bearings, depending on the specific application requirements.

– Each bearing type has its own advantages and limitations, so it’s important to consider factors such as load capacity, speed, lubrication requirements, and environmental conditions when evaluating alternative bearing options.

5. Evaluate Application-Specific Requirements:

– Consider the specific requirements of your industrial application when exploring alternatives to plastic bushings. Factors such as temperature range, chemical compatibility, load capacity, noise reduction, or self-lubrication can influence the suitability of different materials or bearing solutions.

– Take into account the overall performance, durability, and maintenance requirements of the alternative bushing options. Assess how they align with your application’s needs and any potential trade-offs involved.

By conducting online research, consulting with industry experts, contacting manufacturers, considering alternative bearing types, and evaluating application-specific requirements, you can gather valuable information on alternatives to plastic bushings for specific industrial applications. This will help you make informed decisions and select the most suitable bushing solutions for your specific needs.

plastic bush

Are there tutorials on troubleshooting common issues with plastic bushings and their solutions?

Yes, there are tutorials available that provide guidance on troubleshooting common issues with plastic bushings and offer solutions to resolve them. Troubleshooting tutorials can be helpful in identifying and addressing problems that may arise during the use of plastic bushings. Here are some places where you can find tutorials on troubleshooting common issues with plastic bushings:

  • Manufacturer Websites: Many manufacturers of plastic bushings provide tutorials, guides, or technical resources on their websites. These resources often include troubleshooting sections that address common issues encountered with their products. Visit the websites of manufacturers that produce the specific type or brand of plastic bushings you are using. Look for documentation, FAQs, or technical articles that cover troubleshooting topics. Manufacturers are typically knowledgeable about their products and can offer valuable insights into resolving common issues.
  • Online Forums and Communities: Online forums and communities focused on engineering, mechanical design, or specific industries can be excellent sources of information for troubleshooting plastic bushing issues. Participate in these forums and engage with professionals who have experience in working with plastic bushings. Ask questions, describe the issues you are facing, and seek advice from the community. Often, you will find individuals who have encountered similar problems and can share their solutions and experiences.
  • Technical Publications and Journals: Technical publications, journals, and magazines related to mechanical engineering, tribology, or maintenance often contain articles that discuss troubleshooting techniques for various mechanical components, including plastic bushings. These publications may provide case studies, analysis, and practical solutions for common problems. Explore relevant publications and search their archives for articles on plastic bushing troubleshooting. Academic databases and online libraries can be valuable resources for accessing technical publications.
  • YouTube and Online Video Platforms: Video tutorials on platforms like YouTube can be a visual and interactive way to learn about troubleshooting plastic bushing issues. Many content creators and industry experts share their knowledge and demonstrate techniques for diagnosing and resolving common problems. Search for keywords related to plastic bushing troubleshooting on these platforms to find relevant videos. Watching demonstrations can often provide a clearer understanding of the troubleshooting process and the steps involved in resolving issues.
  • Training Courses and Workshops: Some organizations or training providers offer courses or workshops focused on mechanical maintenance, machinery troubleshooting, or specific industrial applications. These training programs may cover topics related to plastic bushings and provide hands-on experience in identifying and resolving common issues. Check with local trade schools, technical institutes, or professional training organizations to see if they offer courses that include plastic bushing troubleshooting as part of their curriculum.

When using troubleshooting tutorials, it is important to carefully understand the symptoms and causes of the issues you are encountering. Ensure that the suggested solutions align with your specific situation and take into account the operating conditions and application requirements of your plastic bushings.

By accessing tutorials from these various sources and applying the recommended troubleshooting techniques, you can gain valuable insights into identifying and resolving common issues with plastic bushings, improving their performance, and prolonging their lifespan.

plastic bush

Can I get recommendations for plastic bushings suitable for high-temperature applications?

When it comes to high-temperature applications, selecting the right plastic bushings is crucial to ensure optimal performance and reliability. While many plastic materials have temperature limitations, there are specific types of plastic bushings that are designed to withstand elevated temperatures. Here are some recommendations for plastic bushings suitable for high-temperature applications:

  • PTFE (Polytetrafluoroethylene) Bushings: PTFE is a commonly used material for high-temperature applications due to its exceptional resistance to heat. PTFE bushings can operate in temperatures ranging from -200°C to +260°C (-328°F to +500°F) without significant loss of performance. They exhibit low friction, excellent chemical resistance, and maintain their dimensional stability at high temperatures.
  • PEEK (Polyether Ether Ketone) Bushings: PEEK is a high-performance thermoplastic that offers excellent mechanical properties and thermal stability. PEEK bushings can withstand temperatures up to +250°C (+482°F) continuously and have short-term temperature resistance up to +300°C (+572°F). They possess low friction, high wear resistance, and good chemical resistance, making them suitable for demanding high-temperature applications.
  • PI (Polyimide) Bushings: Polyimide, often referred to by the brand name Vespel, is a high-temperature polymer known for its excellent thermal stability and mechanical properties. PI bushings can operate in temperatures exceeding +300°C (+572°F) continuously. They offer low wear rates, high strength, and good dimensional stability, making them suitable for extreme high-temperature environments.
  • PEI (Polyetherimide) Bushings: PEI is a high-temperature engineering plastic with good mechanical properties and thermal resistance. PEI bushings can withstand temperatures up to +170°C (+338°F) continuously. They exhibit low creep, high dimensional stability, and good chemical resistance, making them suitable for applications where moderate high-temperature performance is required.
  • PPS (Polyphenylene Sulfide) Bushings: PPS is a high-performance thermoplastic that offers excellent heat resistance. PPS bushings can operate in temperatures up to +200°C (+392°F) continuously. They possess good dimensional stability, low moisture absorption, and high chemical resistance, making them suitable for high-temperature and chemically aggressive environments.

It’s important to note that the temperature ranges mentioned above are general guidelines and can vary depending on specific grades and formulations of the plastic materials. Additionally, the performance of plastic bushings in high-temperature applications can be influenced by factors such as load, speed, and the presence of external factors like chemicals or abrasive particles. Therefore, it’s advisable to consult with the manufacturer or supplier of the plastic bushings to ensure they are suitable for your specific high-temperature application.

When selecting plastic bushings for high-temperature applications, consider factors such as temperature resistance, load capacity, wear resistance, coefficient of friction, and compatibility with mating surfaces. Additionally, ensure that the installation and operating conditions are within the recommended guidelines provided by the manufacturer to maximize the performance and lifespan of the bushings.

By choosing plastic bushings specifically designed for high-temperature applications, you can ensure reliable and long-lasting performance in environments where elevated temperatures are a concern.

China factory Reducer Bushing ASTM PVC-U Plastic Drainage Fittings for Water Plumbing Price List   with high quality China factory Reducer Bushing ASTM PVC-U Plastic Drainage Fittings for Water Plumbing Price List   with high quality
editor by CX 2023-11-17