Product Description
CPVC SCH80 HIGH PRESSURE PIPING SYSTEM (ASTM F437/F439)
PRODUCT INTRODUCTION
Chlorinated polyvinyl chloride (CPVC) is a unique polymer after polyvinyl chloride chlorination. Ordinary PVC molecular chlorine content is 45%, the chlorinated polyvinyl chloride (CPVC) molecules chlorine content is about 64% to 68% up to more than 70%. CPVC tensile capacity is higher than the UPVC, PP, PP- B, PP- RH, PB, HDPE, PE, PE -X RT, etc; its thermal expansion coefficient is lower than the PP, PE, PB; thermal conductivity is lower than that of PP, PE, PB and metal pipe; the temperature resistance and resistance to deformation ability is better than that of PP UPVC, ABS and HDPE.
CPVC compounds, which be used in extruded or molded for pipes and fittings, match the standard ASTM D1784. CPVC SCH80 pipes can match the standard ASTM F441. CPVC SCH80 threaded fittings can match the standard ASTM F437. CPVC SCH80 socket fittings can match the standard ASTM F439.
FEATURES OF PRODUCT
Safety and Health:
The extremely low rate of harmful bacteria breeding is superior to drinking water hygiene standard.
Flame Retardant:
Limited oxygen index of CPVC material is 60%. The minimum ignition temperature is 482C. No dropping fire, very low smoke rate and no poisonous gas. CPVC material has strong resistance to acid and alkali, which can be used for delivering liquid of chemical.
Low Thermal Expansion Coefficient:
CPVC material has low coefficient of thermal expansion.
Pressure Rating:
The minimum burst strength of 1/2″pipe are 18 M pa, at the condition of 73 F water.
Long Service Life:
CPVC material has strong antioxidant and aging resistance performance than other material in utilization.
FIELDS OF APPLICATION
Hot and cold water applications in homes, apartments, hotels, resorts, hospitals, high and low rising buildings, corporate and commercial houses, academic institutes etc
Piping networks for pure water, drinking water and food processing plant
Piping networks for transferring liquid in chemical manufacturing plant, pulp or paper plant
Piping networks for transferring liquid in waste water treatment plant
Piping networks for transferring liquid in metal treating or electroplating plant
Piping networks for transferring liquid in semiconductor or electronic plant
Â
SERVICE
1. We are a manufacturer of plastic tubes and fittings. We accept OEM business.
2. We supply stop valve,pipe end cap,equal/reduceing tee,cold hot water ball valve,union ball valve,threaded elbow(plastic or with metal) and so on.
3. We also supply the connectors Accordingly.
4. We can offer you very competitive prices for some pipes.
5. We welcome you to visit our web and our factory. Your visiting will be highly appreciated.
6. It is my pleasure to help you.
7.If you need more customized services and offers,Please Contact Us.
MORE PRODUCT
OUR ADVANTAGE
1.high quality&industrial leading price
2.quick order processing &Â on-time delivery
3.extremely long usage life for at least 5Â years
4.innovative &Â customer-oriented
5.rich experience in exportation
6.best quality &Â best service with competitive price
7.easy and fast installation, making cost minimized
8.healthy and non-toxic, free of stain,recycable, enviromentally friendly
9.Modern technical equipment in combination with proficient manual work.
10.Lightweight, convenient to transport and handle, good for labor-saving.
OUR COMPANY
FAQ
1. Are you a manufacture or trading company?
We are a well-known solution provider for plastic piping system in the world with 26 years professional experience. Welcome to visit and investigate us, you would find the difference with others.
2. Do you offer OEM service?
Yes. We have our famous brand name. But we can offer OEM service also, with same quality. We can review and accept customer design, or design based on customer requirements, by our professional R&D team.
3.Why Choose Us?
Trust in our experience.
We supply many different standards professional products for more than 60 countries and areas in the world.
Trust in our authority.
We had many professional inspections and certificates. We had passed inspections of CE,  , SGS, and get the certificates of ISO 9001, ISO 14001, OHSAS 18001, and WRAS, and so on.
Trust in our solutions.
We have professional R&D team, QA&QC team, marketing team. We have many patents and awards, can supply highest quality OEM products, and help you and do with you to settle any kind of logistical problems.
Trust in our production capacity.
We have more than 30 pipe extruding machines, and 200 injection molding machines. And those figures still increase each year.
Trust in our financial management capacity.
We obtain the “ZHangZhoug Top Export Brand” by government. We have the ability to make each your US cent efficient. Each cent, which you pay us, would be worth.
4.How to Get a Sample?
Please apply sample.
We can apply free sample for inspection, after the prices confirmed.
Sample is free.
We would supply you sample for free, and freight is collected, if you need a sample to confirm. You also can pay freight to us in advance, and let us prepaid freight, if you thought the prepaid freight is lower than collected freight.
Freight is free.
 We will undertake the freight, and pay the money into your deposit, if you give the order to us finally.
 /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Connection: | Glue/Hot Meld |
|---|---|
| Material: | Plastic |
| Standard: | Standard |
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
What are the environmental benefits of using plastic bushings, and how do they contribute to sustainability?
Plastic bushings offer several environmental benefits and contribute to sustainability in various ways. Here are some of the key advantages:
- Reduced Energy Consumption: Plastic bushings generally have lower friction coefficients compared to metal bushings, which results in reduced energy consumption. The lower friction allows for smoother operation and requires less power to overcome resistance, leading to energy savings. This can be particularly significant in applications with high-speed or continuous motion, where energy efficiency is crucial.
- Elimination of Lubrication: Many plastic bushings are self-lubricating or require minimal lubrication. Unlike metal bushings, which often require regular lubrication to maintain optimal performance, plastic bushings can operate effectively without the need for lubricants. This eliminates the need for oil or grease, reducing the consumption of lubrication products and minimizing the associated environmental impacts, such as oil spills or the disposal of used lubricants.
- Corrosion Resistance: Plastic bushings are generally resistant to corrosion, which can be a significant advantage in various environments. Unlike metal bushings, which may corrode and require frequent replacement, plastic bushings can withstand exposure to moisture, chemicals, and other corrosive substances. This extended service life reduces the frequency of bushing replacements, leading to less material waste and lower environmental impact.
- Weight Reduction: Plastic bushings are typically lighter than their metal counterparts, contributing to weight reduction in machinery and equipment. The use of lighter components can result in lower energy consumption during operation, especially in applications that involve frequent acceleration or deceleration. Additionally, reduced weight can lead to more efficient transportation and decreased fuel consumption during shipping.
- Recyclability: Many plastic bushing materials are recyclable, allowing for the recovery and reuse of the materials at the end of their service life. Plastic bushings made from recyclable materials can be collected, processed, and transformed into new products, reducing the demand for virgin materials and minimizing waste generation. Proper disposal and recycling practices contribute to a circular economy and the conservation of natural resources.
- Noise Reduction: Plastic bushings often exhibit superior damping properties compared to metal bushings, resulting in reduced noise and vibration levels. This can be advantageous in applications where noise reduction is important, such as in residential or office environments. By minimizing noise pollution, plastic bushings contribute to improved working conditions, increased comfort, and enhanced overall environmental quality.
By utilizing plastic bushings and benefiting from their environmental advantages, industries can contribute to sustainability efforts by reducing energy consumption, minimizing lubrication requirements, extending equipment lifespan, promoting recyclability, and improving overall operational efficiency. However, it is important to note that the sustainability of plastic bushings also depends on responsible manufacturing practices, proper disposal or recycling methods, and the selection of eco-friendly materials.
Where can I purchase plastic bushings designed for specific industry applications, such as automotive or medical equipment?
If you are looking to purchase plastic bushings designed for specific industry applications, such as automotive or medical equipment, there are several options available to you. Here are some places where you can find and purchase plastic bushings tailored for these industries:
- Industrial Suppliers and Distributors: Industrial suppliers and distributors specializing in components for specific industries often carry plastic bushings designed for automotive or medical applications. These suppliers have a wide range of products and can provide guidance on selecting the right bushings for your specific requirements. Search for reputable industrial suppliers or distributors that cater to the automotive or medical sectors, and inquire about their available plastic bushing options.
- Online Marketplaces and E-commerce Platforms: Online marketplaces and e-commerce platforms offer a convenient way to search for and purchase plastic bushings designed for specific industry applications. Platforms like Amazon, Alibaba, or ThomasNet have extensive catalogs of industrial components, including plastic bushings. Use relevant keywords such as “automotive plastic bushings” or “medical equipment bushings” to narrow down your search and explore the available options from different sellers.
- Manufacturer Websites: Visit the websites of reputable manufacturers that specialize in producing plastic bushings for specific industries. Many manufacturers provide detailed product information, specifications, and application guides on their websites. Identify manufacturers known for their expertise in automotive or medical applications, and explore their product offerings. Manufacturer websites often have contact information or online inquiry forms that allow you to directly reach out for purchasing inquiries.
- Trade Shows and Industry Events: Attend trade shows, exhibitions, or industry events related to the automotive or medical sectors. These events often feature a wide range of suppliers and manufacturers showcasing their products and innovations. It’s an excellent opportunity to connect with industry experts, explore the latest advancements in plastic bushings, and establish contacts with suppliers who specialize in serving specific industry applications.
- Local Distributors and Retailers: Check if there are local distributors or retailers in your area that specialize in supplying components to the automotive or medical industries. These distributors often have physical stores or warehouses where you can personally visit, browse their product offerings, and make purchases. Local distributors may also provide personalized support and expertise to help you find the right plastic bushings for your application.
When purchasing plastic bushings designed for specific industry applications, it’s important to consider factors such as material compatibility, performance requirements, and industry-specific certifications or standards. Ensure that the chosen plastic bushings meet the necessary specifications and regulations for the intended application.
By exploring these purchasing options and consulting with industry experts, you can find and purchase plastic bushings that are specifically designed for automotive or medical equipment, ensuring optimal performance and compatibility with the requirements of these industries.
Can I get recommendations for plastic bushings suitable for high-temperature applications?
When it comes to high-temperature applications, selecting the right plastic bushings is crucial to ensure optimal performance and reliability. While many plastic materials have temperature limitations, there are specific types of plastic bushings that are designed to withstand elevated temperatures. Here are some recommendations for plastic bushings suitable for high-temperature applications:
- PTFE (Polytetrafluoroethylene) Bushings: PTFE is a commonly used material for high-temperature applications due to its exceptional resistance to heat. PTFE bushings can operate in temperatures ranging from -200°C to +260°C (-328°F to +500°F) without significant loss of performance. They exhibit low friction, excellent chemical resistance, and maintain their dimensional stability at high temperatures.
- PEEK (Polyether Ether Ketone) Bushings: PEEK is a high-performance thermoplastic that offers excellent mechanical properties and thermal stability. PEEK bushings can withstand temperatures up to +250°C (+482°F) continuously and have short-term temperature resistance up to +300°C (+572°F). They possess low friction, high wear resistance, and good chemical resistance, making them suitable for demanding high-temperature applications.
- PI (Polyimide) Bushings: Polyimide, often referred to by the brand name Vespel, is a high-temperature polymer known for its excellent thermal stability and mechanical properties. PI bushings can operate in temperatures exceeding +300°C (+572°F) continuously. They offer low wear rates, high strength, and good dimensional stability, making them suitable for extreme high-temperature environments.
- PEI (Polyetherimide) Bushings: PEI is a high-temperature engineering plastic with good mechanical properties and thermal resistance. PEI bushings can withstand temperatures up to +170°C (+338°F) continuously. They exhibit low creep, high dimensional stability, and good chemical resistance, making them suitable for applications where moderate high-temperature performance is required.
- PPS (Polyphenylene Sulfide) Bushings: PPS is a high-performance thermoplastic that offers excellent heat resistance. PPS bushings can operate in temperatures up to +200°C (+392°F) continuously. They possess good dimensional stability, low moisture absorption, and high chemical resistance, making them suitable for high-temperature and chemically aggressive environments.
It’s important to note that the temperature ranges mentioned above are general guidelines and can vary depending on specific grades and formulations of the plastic materials. Additionally, the performance of plastic bushings in high-temperature applications can be influenced by factors such as load, speed, and the presence of external factors like chemicals or abrasive particles. Therefore, it’s advisable to consult with the manufacturer or supplier of the plastic bushings to ensure they are suitable for your specific high-temperature application.
When selecting plastic bushings for high-temperature applications, consider factors such as temperature resistance, load capacity, wear resistance, coefficient of friction, and compatibility with mating surfaces. Additionally, ensure that the installation and operating conditions are within the recommended guidelines provided by the manufacturer to maximize the performance and lifespan of the bushings.
By choosing plastic bushings specifically designed for high-temperature applications, you can ensure reliable and long-lasting performance in environments where elevated temperatures are a concern.
editor by CX 2024-04-09
